SGE GC Inlet Liners Split liner; w/quartz wool
Liners
| Description and Geometry Sketch | OD (mm) | ID (mm) | Length (mm) | Pack Size | Part No. |
|---|---|---|---|---|---|
| Deactivated Liner for Agilent 5890, 6850, 6890, 7890 and HP4890 | |||||
 4.0mm ID Split, with quartz wool | 6.3 | 4 | 78.5 | 5 | 092001 |
| 1 | 09200101 | ||||
| 25 | 092220 | ||||
 Split / Splitless FocusLiner® | 6.3 | 4 | 78.5 | 5 | 092002 |
| 1 | 09200201 | ||||
| 25 | 092219 | ||||
 Split / Splitless Tapered FocusLiner® | 6.3 | 4 | 78.5 | 5 | 092003 |
| 1 | 09200301 | ||||
| 25 | 092011 | ||||
 2.0mm ID Splitless (quartz), straight-through liner | 6.1 | 2 | 78.5 | 5 | 092004 |
| 1 | 09200401 | ||||
 Split / Splitless FAST FocusLiner® | 6.3 | 2.3 | 78.5 | 5 | 092005 |
| 1 | 09200501 | ||||
| 25 | 092008 | ||||
 4.0mm ID Split, straight-through liner | 6.3 | 4 | 78.5 | 5 | 092007 |
| 1 | 09200701 | ||||
| 25 | 092222 | ||||
 4.0mm ID Split / Splitless. Recessed Gooseneck with quartz wool | 6.3 | 4 | 78.5 | 5 | 092010 |
| 1 | 09201001 | ||||
| 25 | 092223 | ||||
 2.0mm ID Splitless with Recessed Gooseneck | 6.3 | 2 | 78.5 | 5 | 092013 |
| 1 | 09201301 | ||||
 1.2mm ID Direct, straight-through liner | 6.3 | 1.2 | 78.5 | 5 | 092016 |
| 1 | 09201601 | ||||
| 25 | 092224 | ||||
 4.0mm ID Split / Splitless with single taper | 6.3 | 4 | 78.5 | 5 | 092017 |
| 1 | 09201701 | ||||
| 25 | 092229 | ||||
 4.0mm ID Split / Splitless with double taper | 6.3 | 4 | 78.5 | 5 | 092018 |
| 1 | 09201801 | ||||
| 25 | 092230 | ||||
 4.0mm ID Split / Splitless with single taper and quartz wool | 6.3 | 4 | 78.5 | 5 | 092019 |
| 1 | 09201901 | ||||
| 25 | 092218 | ||||
4.0mm ID Split / Splitless with single taper and quartz wool, pre-fitted o-ring and TI deactivation | 6.3 | 4 | 78.5 | 5 | 09262019 |
| 1 | 0926201901 | ||||
 Split / Splitless Tapered FAST FocusLiner® | 6.3 | 2.3 | 78.5 | 5 | 092111 |
| 1 | 09211101 | ||||
| 25 | 092115 | ||||
 ConnecTite Liner Standard | 6.3 | 4 | 78.5 | 5 | 092324 |
 ConnecTite Liner Top Hole | 6.3 | 4 | 78.5 | 5 | 092325 |
 ConnecTite Liner Bottom Hole | 6.3 | 4 | 78.5 | 5 | 092326 |
| Agilent Liner Removal Tool | 1 | 092921 | |||
| Agilent Packed Column Liner | |||||
 1.8mm ID Packed column liner for Agilent Technology Models 5880, 5890, 6890 | 3 | 1.8 | 92 | 5 | 092234 |
| 1 | 09223401 | ||||
| 25 | 092235 | ||||
| SGE liner for AC Control Injector | |||||
1.6mm ID AC Control Sim Dist liner. Programmed Injector (not deactivated) | 3 | 1.6 | 73 | 5 | 092210 |
| 1 | 09221001 | ||||
| 25 | 092211 | ||||
| OSGE liners for Gerstel CIS 4 Injector | |||||
 1.8mm ID, Sintered Glass. Large Volume Injection (LVI) | 3 | 1.8 | 71 | 5 | 092243 |
| 1 | 09224301 | ||||
 Single Baffle | 3 | 1.8 | 71 | 5 | 092246 |
| 1 | 09224601 | ||||
Liner O-rings and Sealing Rings
| Description | Usage | Pack Size | Part No. |
|---|---|---|---|
| Viton O-ring | Can be used at temperatures up to 300 °C. Suitable for liners with OD of 6.3 mm. | 10 | 0726532 |
| Graphite Sealing Ring | Can be used at temperatures up to 450 °C. Suitable for all inlet liners above except 092004 and 09200401. | 10 | 0726005 |
| Graphite Sealing Ring | Can be used at temperatures up to 450 °C. Suitable for use with liners 092004 and 09200401. | 10 | 0726006 |
GiMiTEC ID#
1520819
GiMiTEC CPL# https://channel.gimitec.com/node/1520819
GiMiTEC CPL# https://channel.gimitec.com/node/1520819
Quotation Information
Request for QuotationGiMiTEC could help to find the right part as you need. For any inquiries or questions just Click Here to Contact Us
|
Technical Support
We're Here to Help! Everything you need from troubleshooting, to method development assistance, to quality documents...!
Content Correction
Disclaimer
NOTE: All discounts, coupons and promotions displayed on the web store are valid for web store orders only. Prices on the web store are exclusively for valued customers of GiMiTEC™. GiMiTEC™ does not sell parts for stocking purposes. Your account information is used to login to the site. Please save your password in a safe place. Taxes are charged after your order is placed. When ordering certain items on our store in large quantities the cost of shipping these items will increase your total order.
* Although GiMiTEC™ try our best to ensure that our online web store is kept up-to-date with prices and shopping choices, prices are subject to change without notice. In addition, as situations warrant, substitutions are made for discontinued items.
All parts are not guaranteed in stock and may delay your shipment. This is especially true in regards to items such as chemicals. GiMiTEC™ reserve the right to cancel your order at any time.
GiMiTEC™ reserves the right, at its sole discretion, to modify, add or remove any terms or conditions of these above information, or any information contained in the website without notice or liability. Any changes to these above information shall be effectively immediately following the posting of such changes on this website.
Online Pricing
Despite our diligent efforts, a small number of items in our web site may be incorrectly priced. Rest assured that we will verify all prices as part of our shipping procedures and provide you with correct pricing in your order confirmations. We apologize in advance for any inconvenience you might experience. Thank you.
GiMiTEC™ reserves all rights to correct any errors in the online system prior to shipping and billing. If you suspect an error in pricing, please contact our Customer Service Department.
Trademark Legal Notice
Trademarks of Other Manufactures mentioned herein are the property of their (Other Manufactures). or their respective owners. GiMiTEC™ is not affiliated with or licensed by any of these companies. All product names, logos, and brands are property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, logos, and brands does not imply endorsement.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and/or names or their products and are the property of their respective owners. We disclaims proprietary interest in the marks and names of others.
GiMiTEC™ and other GiMiTEC™ brand name. The trademarks mentioned herein are the property of the Gimium™ Ecosystem.
GiMiTEC Platform
Recent blog posts
- GC Column Cross-Reference: Columns by Phase
- OEM D2, Deuterium Lamps for HPLC
- D2 Deuterium Lamps and HCL lamps for AAS/ HPLC (alternative Products)
- Restek Best Selling product for Agilent GC System
- SGE Product for Agilent Liners Deactivated Liners For Agilent 7890, 6890, 6850, and HP4890, 5890
- HPLC Column List by USP, Manufacture, Phase, and Name
- PASCO Scientific Product Part List
- Hichrom Alltech 2018 Part List information
- Thermo Scientific Lab Product Part information
- Standard Reference Materials Part List information
Gimium™ Ecosystem
