Description | Agilent Part # | VWR Part # | Restek Part # |
---|---|---|---|
Union, 1/16in. SS zero dead volume | 0100-0900 | HP0100-0900 | 20150 |
Stator face assy for 0101-0921 valve | 0100-1851 | HP0100-1851 | 26424 |
Stator face assy for 0101-0921 valve | 0100-1851 | CA0100-1851 | 26424 |
Isolation seal for 0101-0920/1 valves | 0100-1852 | HP0100-1852 | 25917 |
Rotor seal (Vespel, 400 bar, 2 grooves) | 0100-1853 | HP0100-1853 | 25275 |
ZDV union, PEEK, with Fittings | 0100-2441 | 89005-434 | 25323 |
PTFE Frits 5PK | 01018-22707 | HP-01018-22707 | 25466 |
PTFE Frits 5PK | 01018-22707 | CA01018-22707 | 25466 |
Solvent inlet filter, stainless steel | 01018-60025 | HP01018-60025 | 26423 |
Solvent inlet filter, stainless steel | 01018-60025 | CA01018-60025 | 26423 |
Cap.tubing w/fittings, 1/16 to 1/16in M. | 01090-87305 | HP01090-87305 | 26525 |
Column Nut for MS interface | 05988-20066 | HP05988-20066 | 20643 |
Column Nut for MS interface | 05988-20066 | CA05988-20066 | 20643 |
1/16 od 0.007 id (0.18mm) 1.5m PEEK tbng | 0890-1763 | HP0890-1763 | 25066 |
Seal, wash | 0905-1175 | HP0905-1175 | 25277 |
PE-Pump Seal 2/PK | 0905-1420 | HP0905-1420 | 25918 |
DB-17MS 20m, 0.18mm, 0.18u | 121-4722 | CA121-4722 | 14102 |
DB-5 30m, 0.25mm, 0.25u | 122-5032 | 21512-124 | 10223 |
DB-5MS 30m, 0.25mm, 0.25u | 122-5532 | 21512-135 | 13623 |
DB-5.625 30m, 0.25mm, 0.25u | 122-5631 | CA122-5631 | 13623 |
DB-WAX 30m, 0.25mm, 0.25u | 122-7032 | 21512-159 | 12423 |
DB-1HT 15m, 0.32mm, 0.10u | 123-1111 | CA123-1111 | 13950 |
DB-624 30m, 0.32mm, 1.80u | 123-1334 | 21512-202 | 10970 |
DB-WAX 30m, 0.32mm, 0.50u | 123-7033 | 21512-264 | 12439 |
DB-624 30m, 0.53mm, 3.00u | 125-1334 | 21512-304 | 10971 |
DB-WAX 30m, 0.53mm, 1.00u | 125-7032 | 21512-352 | 12455 |
FS,Deactivated -.530mm X10m | 160-2535-10 | 21517-270 | 10047 |
FS,Deactivated -.530mm X 5m | 160-2535-5 | CA160-2535-5 | 10045 |
FS,Deactivated -.530mm X 5m | 160-2535-5 | 21517-260 | 10045 |
Jet, Adaptable, packed, 0.47mm ID | 18710-20119 | HP18710-20119 | 21697 |
FID/TCD performance evaluat. sample kit | 18710-60170 | HP18710-60170 | 33908 |
FID/TCD performance evaluat. sample kit | 18710-60170 | CA18710-60170 | 33908 |
Reducing nut for SSL | 18740-20800 | HP18740-20800 | 22078 |
Reducing nut for SSL | 18740-20800 | CA18740-20800 | 22078 |
Septum retainer nut | 18740-60835 | HP18740-60835 | 21309 |
Liner, split, with cup, no glasswool | 18740-80190 | HP18740-80190 | 20709 |
liner,direct,1.5mm ID, non-deactivated | 18740-80200 | HP18740-80200 | 20972 |
Liner,direct,2mm ID, non-deactivated | 18740-80220 | HP18740-80220 | 20914 |
HP-5 30m, 0.32mm, 0.25um | 19091J-413 | HP19091J-413 | 10224 |
HP-5MS 30m, 0.25mm, 0.25u | 19091S-433 | 97015-064 | 12623 |
Ignitor Glow Plug Assembly | 19231-60680 | HP19231-60680 | 21001 |
Ignitor Glow Plug Assembly | 19231-60680 | CA19231-60680 | 21001 |
Jet, Adaptable, capillary, 0.29mm ID | 19244-80560 | HP19244-80560 | 20673 |
Jet, Adaptable, capillary, 0.29mm ID | 19244-80560 | CA19244-80560 | 20673 |
Liner, Splitless, straight, 4x6.3x78.5mm | 210-3003 | 21512-692 | 23301.25 |
Liner, Focus, 4890-6890, 4mm (5) | 210-4004-5 | 21513-680 | 23305.5 |
Liner, Focus, Tapered, 4mm (5) | 210-4022-5 | 21513-682 | 22984 |
Deuterium lamp, 1100/1200 DAD/MWD | 2140-0590 | HP52222-002 | 25261 |
Deuterium lamp, 1100/1200 DAD/MWD | 2140-0590 | CA2140-0590 | 25261 |
Deuterium lamp, 8453 UV-vis | 2140-0605 | HP2140-0605 | 25263 |
Deuterium lamp, 8453 UV-vis | 2140-0605 | CA2140-0605 | 25263 |
Deut. lamp, 1100/1200DAD/MWD lnglife-A | 2140-0813 | 80082-998 | 25399 |
GOLD SEAL OUTLET | 5001-3707 | HP5001-3707 | 25467 |
Ferrule, 0.4mm G 0.05-0.25 col 10/PK | 500-2114 | 21512-994 | 20250 |
Ferrule, 0.8mm G 0.45-0.53 col 10/PK | 500-2118 | 21512-999 | 20252 |
Ferrule, 0.8mm G 0.45-0.53 col 10/PK | 500-2118 | CA500-2118 | 20252 |
Column nut, Finger tight , cap columns | 5020-8292 | HP5020-8292 | 21040, 21041 |
Column nut, Finger tight 530 um columns | 5020-8293 | HP5020-8293 | 21040, 21041 |
Blanking plug, finger-tight style | 5020-8294 | HP5020-8294 | 21883 |
Blanking plug, finger-tight style | 5020-8294 | CA5020-8294 | 21883 |
Flexible tubing, green, 105mm, 0.17mm id | 5021-1816 | HP5021-1816 | 26531 |
flex tubing, 150mm, 0.17mm id. | 5021-1817 | HP5021-1817 | 26534 |
Flex capillary, 0.17x280 mm, no fitting | 5021-1818 | HP5021-1818 | 26535 |
Flexible tubing, 400 mm, 0.17 mm id. | 5021-1819 | HP5021-1819 | 26536 |
Glass filter, solvent inlet | 5041-2168 | HP5041-2168 | 26431 |
PEEK tubing OD/ID 1.6/0.13mm, length 5 | 5042-6461 | 89040-526 | 25065 |
Washers .375 od 12/PK | 5061-5869 | HP-5061-5869 | 21710 |
1/16in Fittings and Ferrules, 10/Pk | 5062-2418 | HP-5062-2418 | 26537 |
Helium tubing, 5m PTFE 0.057in id | 5062-2461 | HP5062-2461 | 24990 |
Ferrule, 0.5mm VG cond .32 col lng 10/PK | 5062-3506 | HP-5062-3506 | 20212 |
Ferrule, 0.5mm VG cond .32 col lng 10/PK | 5062-3506 | CA5062-3506 | 20212 |
Ferrule, 0.4mm VG cond .25 col lng 10/PK | 5062-3508 | HP-5062-3508 | 20211 |
Ferrule, 0.4mm VG cond .25 col lng 10/PK | 5062-3508 | CA5062-3508 | 20211 |
Ferrule, 0.8mm VG 0.45-0.53 col 10/PK | 5062-3512 | CA5062-3512 | 20263 |
Ferrule, 0.8mm VG 0.45-0.53 col 10/PK | 5062-3512 | HP-5062-3512 | 20263 |
Ferrule, 0.5mm VG 0.32 col 10/PK | 5062-3514 | CA5062-3514 | 20248 |
Ferrule, 0.5mm VG 0.32 col 10/PK | 5062-3514 | HP-5062-3514 | 20248 |
Liner,splitless,single-taper,glswl,deact | 5062-3587 | HP5062-3587 | 23303.1 |
Liner,splitless,single-taper,glswl,deact | 5062-3587 | CA5062-3587 | 23303.1 |
AIV Cartridge (400bar) | 5062-8562 | HP52222-000 | 26393 |
AIV Cartridge (400bar) | 5062-8562 | CA5062-8562 | 26393 |
Sieves (SS) for Outlet Valve 10/PK | 5063-6505 | 47725-038 | 25266 |
Bottle cap with 3-hole insert | 5063-6531 | HP5063-6531 | 25300 |
Bottle cap with 3-hole insert | 5063-6531 | CA5063-6531 | 25300 |
Sapphire piston | 5063-6586 | HP5063-6586 | 25273 |
Sapphire piston | 5063-6586 | CA5063-6586 | 25273 |
Plunger seal for 1100/1200 and 1050 2/PK | 5063-6589 | HP5063-6589 | 22483 |
Plunger seal for 1100/1200 and 1050 2/PK | 5063-6589 | CA5063-6589 | 22483 |
PEEK finger-tight 1/16 in, 10PK | 5063-6591 | HP5063-6591 | 25015 |
PEEK finger-tight 1/16 in, 10PK | 5063-6591 | CA5063-6591 | 25015 |
Extended PM kit 1100/1050/1200 pumps | 5065-4499 | 80083-164 | 25915 |
Ferrule, 1.0mm Graphite 0.53 col 10/PK | 5080-8773 | HP-5080-8773 | 20252 |
Ferrule, 1.0mm Graphite 0.53 col 10/PK | 5080-8773 | CA5080-8773 | 20252 |
Ferl 1/4in VG SP-22 40pct graphite 10PK | 5080-8774 | HP-5080-8774 | 20221 |
Ferrule, 0.5mm Graphite 0.32 col 10/PK | 5080-8853 | HP-5080-8853 | 20248 |
Ferrule, 0.5mm Graphite 0.32 col 10/PK | 5080-8853 | CA5080-8853 | 20248 |
O-Ring 12/PK, Fluoroelastomer, 0.426inID | 5080-8898 | HP-5080-8898 | 21685 |
Front ferrules, 1/16in SS, 10/Pk | 5180-4108 | HP-5180-4108 | 23153 |
Back ferrules, 1/16in SS, 10/Pk | 5180-4114 | HP-5180-4114 | 23156 |
Silcone Gskets 0.890inod/0.709inid 12/Pk | 5180-4165 | HP-5180-4165 | 23064 |
1/8in x .065in Copper Tubing,50 Ft Coil | 5180-4196 | HP5180-4196 | 21513 |
Septa thru hole 5mm 25/PK | 5181-1260 | CA5181-1260 | 27082 |
Syringe, 10ul tapered, FN 23-26s/42/HP | 5181-1267 | HP5181-1267 | 24596 |
Syringe, 10ul tapered, FN 23-26s/42/HP | 5181-1267 | CA5181-1267 | 24596 |
Syringe, 5ul tapered, FN 23-26s/42/HP | 5181-1273 | CA5181-1273 | 24593 |
Syringe, 5ul tapered, FN 23-26s/42/HP | 5181-1273 | HP5181-1273 | 24593 |
Liner,splitless,dbl-tpr,no glswl,deacted | 5181-3315 | HP5181-3315 | 23308.1 |
Liner,splitless,dbl-tpr,no glswl,deacted | 5181-3315 | CA5181-3315 | 23308.1 |
Liner,splitls,sngl-taper,no glswl,deact | 5181-3316 | HP5181-3316 | 23302.1 |
Liner,splitls,sngl-taper,no glswl,deact | 5181-3316 | CA5181-3316 | 23302.1 |
Inert Liner, splitless, single taper | 5181-3316I | 80089-928 | 20798 |
Ferrule, 0.4mm VG 0.1-0.25 col 10/PK | 5181-3323 | HP-5181-3323 | 20238 |
Ferrule, 0.4mm VG 0.1-0.25 col 10/PK | 5181-3323 | CA5181-3323 | 20238 |
Syr. 10ul tapered, FN 23-26s/42/HP, 6/PK | 5181-3360 | HP-5181-3360 | 24600 |
Syr. 10ul tapered, FN 23-26s/42/HP, 6/PK | 5181-3360 | CA5181-3360 | 24600 |
Plunger 10ul, FN, GT,23/26 ga PTFE Tip | 5181-3365 | HP5181-3365 | 21218 |
Vial,crimp,2ml,ambr,WrtOn,cert,100PK | 5181-3376 | CA5181-3376 | 24385 |
400ul flat bottom glass insert, 500/pk | 5181-3377 | CA5181-3377 | 24517 |
Septa , Partial Thru hole Red 11mm 50/PK | 5181-3383-50 | 80076-484 | 27090 |
Syr. 5ul tapered, FN 23-26s/42/HP, 6/PK | 5181-8810 | HP-5181-8810 | 24594 |
Syr. 5ul tapered, FN 23-26s/42/HP, 6/PK | 5181-8810 | CA5181-8810 | 24594 |
Microseal Septum, low pressure | 5181-8815 | HP5181-8815 | 22815 |
Liner, direct, 2mm ID, deactivated | 5181-8818 | HP5181-8818 | 23313.1 |
Liner, direct, 2mm ID, deactivated | 5181-8818 | CA5181-8818 | 23313.1 |
Column nut, universal 2/PK | 5181-8830 | HP-5181-8830 | 21884 |
Column nut, universal 2/PK | 5181-8830 | CA5181-8830 | 21884 |
Capillary tubing cutter, 4/PK | 5181-8836 | HP-5181-8836 | 20116 |
Capillary tubing cutter, 4/PK | 5181-8836 | CA5181-8836 | 20116 |
250ul insert, polypropylene 100/PK | 5182-0549 | CA5182-0549 | 24518 |
Syringe, 5ul, FN, 23 ga, pt.HP 6/PK | 5182-0875 | HP5182-0875 | 24783 |
Syringe, 5ul, FN, 23 ga, pt.HP 6/PK | 5182-0875 | CA5182-0875 | 24783 |
Microseal General Purpose septum only | 5182-3444 | HP5182-3444 | 22812 |
Microseal General Purpose septum only | 5182-3444 | CA5182-3444 | 22812 |
S/SL Gold Seal Disk with Cross | 5182-9652 | HP5182-9652 | 20477 |
S/SL Gold Seal Disk with Cross | 5182-9652 | CA5182-9652 | 20477 |
PTV Liner, Multi Baffled, Deactivated | 5183-2037 | HP5183-2037 | 23433.10* |
Vial,screw,2ml,clr,WrtOn,SLN,cert,100PK | 5183-2071 | CA5183-2071 | 22789 |
Vial,screw,2ml,ambr,WrtOn,SLN,cert,100PK | 5183-2072 | CA5183-2072 | 22788 |
Liner,split,low prs drop,glswl,tpr,deact | 5183-4647 | HP5183-4647 | 20994 |
Liner,split,low prs drop,glswl,tpr,deact | 5183-4647 | CA5183-4647 | 20994 |
Liner,splitless,tapr,glswool deactivated | 5183-4693 | HP5183-4693 | 23303.5 |
Liner,splitless,taper,glaswl,deactivated | 5183-4694 | CA5183-4694 | 23303.25 |
Liner,splitless,taper,no glasswool,deact | 5183-4695 | HP5183-4695 | 23302.5 |
Liner,Split,Low Pressdrop,Tpr,Glswl,Deac | 5183-4701 | HP5183-4701 | 20995 |
Lnr,gen purp split/spltls,tpr,glswl,deac | 5183-4711 | HP5183-4711 | 22983 |
Lnr,gen purp split/spltls,tpr,glswl,deac | 5183-4711 | CA5183-4711 | 22983 |
Lnr,gen purp split/spltls,tpr,GW, 5/PK | 5183-4712 | HP5183-4712 | 22984 |
Syr, 5ul, strght,fit pl,FN,26s/42/HP 6PK | 5183-4728 | HP5183-4728 | 21230 |
Syr,10ul,strght,fit pl,FN,26s/42/HP 6PK | 5183-4729 | CA5183-4729 | 24599 |
Septa Non-Stick BTO Inlet 11mm 50 pk | 5183-4757 | HP5183-4757 | 27090 |
Septa Non-Stick BTO Inlet 11mm 50 pk | 5183-4757 | CA5183-4757 | 27090 |
Septa Non-Stick BTO Inlet 11mm 100 pk | 5183-4757-100 | 80076-486 | 27091 |
Septa Bleed/Temp Optimzd Inlt 5mm 50PK | 5183-4758 | CA5183-4758 | 27082 |
Septa Bleed/Temp Optimzd Inlt 5mm 50PK | 5183-4758 | HP5183-4758 | 27082 |
Septa Non-Stick Adv Green 11mm 50pk | 5183-4759 | HP5183-4759 | 27142 |
Septa Non-Stick Adv Green 11mm 50pk | 5183-4759 | CA5183-4759 | 27142 |
Septa Non-Stick Adv Green 11mm 100pk | 5183-4759-100 | 89040-556 | 27091 |
Septa Non-Stick Long Life 11mm 50pk | 5183-4761 | HP5183-4761 | 27090 |
Septa Non-Stick Long Life 11mm 50pk | 5183-4761 | CA5183-4761 | 27090 |
Blue screw caps,PTFE/red sil septa,500pk | 5185-5820 | 89040-576 | 24486* |
Green screw cap,PTFE/sil septa,500pk | 5185-5864 | 89040-588 | 24488* |
SILTITE FERRULES 0.32MM PK10 | 5188-5362 | 89027-372 | 566081 |
Liner O-Ring, Non-Stick 10PK | 5188-5365 | 89009-088 | 22241 |
Liner O-Ring, Non-Stick 10PK | 5188-5365 | CA5188-5365 | 22241 |
Liner O-Ring, Non-Stick Flip-Top | 5188-5366 | 12000-382 | 22336 |
Liner O-Ring, Non-Stick Flip-Top | 5188-5366 | CA5188-5366 | 22336 |
Gold Plated Inlet Seal with Washer | 5188-5367 | 89040-662 | 21317 |
Gold Plated Inlet Seal with Washer | 5188-5367 | CA89040-662 | 21317 |
Split vent trap PM kit,single cartridge | 5188-6495 | 89041-948 | 23032* |
Blue Screw Cap,PTFE/Red Si Septa 1000 | 5190-1599 | 97048-817 | 24486 |
Gold Plated inlet Seal and Washer, 10/pk | 5190-2209 | CA11014-818 | 21318 |
Gold Plated inlet Seal and Washer, 10/pk | 5190-2209 | 30621-500 | 21318 |
Liner,UI,splitless,sngle taper,glasswool | 5190-2293 | 89183-058 | 23303.1 |
Liner, UI,split, straight, glass wool | 5190-2294 | 89183-072 | 23300.1 |
Liner,UI,splitless,single taper,GW, 5/pk | 5190-3163 | 89186-206 | 23303.5 |
Liner,UI,split,straight,Glass Wool, 5/pk | 5190-3164 | 89186-208 | 23300.5 |
Dispersive SPE 2ml, Fruits And Veg, EN | 5982-5021 | CA97034-276 | 26215 |
Dispersive SPE 15ml, Fruits And Veg, EN | 5982-5056 | 97034-280 | 26223 |
Dispersive SPE 2ml, Fatty Samples, EN | 5982-5121 | CA97034-284 | 26216 |
Dispersive SPE 15ml, Fatty Samples, AOAC | 5982-5158 | 97034-290 | 56221 |
QuEChERS Extraction Packets, EN Method | 5982-7650 | CA97044-162 | 26238 |
Rough Pump Fluid, 1Gal., Inland 45 | 6040-0798 | HP6040-0798 | 24819* |
Rough Pump Fluid, 1Gal., Inland 45 | 6040-0798 | CA6040-0798 | 24819* |
Rough pump oil, Inland 45, 1 qt | 6040-0834 | HP6040-0834 | 24819 |
Rough pump oil, Inland 45, 1 qt | 6040-0834 | CA6040-0834 | 24819 |
Glass Union,Universal, 2-Way (25) | 705-0825 | CA705-0825 | 20401* |
F.S. Union, Universal, 2-Way (5) | 705-0905 | CA705-0905 | 20400 |
CL,Vial,screw 8-425,2ml,clr,WrtOn,100PK | 8010-0010 | CA89186-716 | 24619 |
CL,Vial,screw,2ml,clr,WrtOn,100PK | 8010-0014 | 89186-700 | 21140 |
CL,Vial,HS,crimp,FB,10ml,clr,100PK | 8010-0029 | 89186-666 | 24683 |
CL,Vial,HS,crimp,FB,20ml,clr,100PK | 8010-0033 | 89186-698 | 24685 |
CL snap cap 11mm clr PTFE/red sil 100pk | 8010-0104 | CA89186-896 | 21731 |
CL snap cap 11mm clr PTFE/red sil 100pk | 8010-0104 | 89186-896 | 21731 |
CL snap cap 11m clr prslt PTFE/sil 100pk | 8010-0106 | 89186-900 | 21733 |
Syringe 10ul straight, FN 23/42/HP | 9301-0713 | HP9301-0713 | 24785 |
Syringe 10ul straight, FN 23/42/HP | 9301-0713 | CA9301-0713 | 24785 |
Syringe 10ul straight, FN 23/42/HP, 6/PK | 9301-0725 | HP9301-0725 | 24787 |
Syringe 10ul straight, FN 23/42/HP, 6/PK | 9301-0725 | CA9301-0725 | 24787 |
Bond Elut-C18, 200mg 3ml, 50/pk | 12102025 | CA89184-126 | 26031 |
Bond Elut C18, 500mg 6ml, 30/pk | 12102052 | 89184-130 | 24050 |
Adapters-1, 3 and 6ml, 15/pk | 12131001 | 89183-194 | 26007 |
Reservoir-2 Frits, 3ml Capacity, 100/pk | 12131014 | 89183-214 | 26002 |
Frits-3ml, 3/8in, 20um, 100/pk | 12131020 | 89183-226 | 26017 |
Gas Clean Filter Oxygen | CP17970 | 89184-320 | 22029 |
Gas Clean Filter Moisture | CP17971 | 89184-322 | 22028 |
Gas Clean Filter Charcoal | CP17972 | 89184-324 | 22030 |
Gas Clean Filter Carrier Gas | CP17973 | 89184-326 | 21982 |
Gas Clean Filter Carrier Gas | CP17973 | CA89184-326 | 21982 |
CP-SimDist CB High Temp 5 x 0.53 (0.09) | CP7569 | 89191-092 | 70112-065 |
Bottle Head Assembly | G1311-60003 | HPG1311-60003 | 25059 |
LC Pump PTFE connecting tube | G1311-67304 | HPG1311-67304 | 25058 |
Cartridge for active inlet valve 600bar | G1312-60020 | 89009-596 | 26393 |
SST Capillary 400x0.17 mm, m/m, ps/ps | G1312-87303 | 89013-790 | 26536 |
Autosampler Start Up Kit | G1313-68709 | HPG1313-68709 | 25271 |
Needle, G1313A Autosampler | G1313-87201 | HPG1313-87201 | 25278 |
Needle, G1313A Autosampler | G1313-87201 | CAG1313-87201 | 25278 |
Needle, 900ul, 1100/1200 | G1313-87202 | HPG1313-87202 | 25916 |
Capillary to metering device | G1313-87301 | HPG1313-87301 | 26533 |
Capillary to metering device | G1313-87301 | CAG1313-87301 | 26533 |
D2 LAMP L6903 WITH BOX | G1314-60100 | HPG1314-60100 | 25262 |
D2 LAMP L6903 WITH BOX | G1314-60100 | CATXG131460100 | 25262 |
D2 LAMP L6903 WITH BOX | G1314-60100 | CAG1314-60100 | 25262 |
FID Collector body | G1531-20690 | HPG1531-20690 | 21139* |
FID Collector Insulator | G1531-20700 | HPG1531-20700 | 21139* |
FID Collector Insulator | G1531-20700 | CAG1531-20700 | 21139* |
Jet, Capillary Optimized,0.29mm ID | G1531-80560 | HPG1531-80560 | 21683 |
Jet, Capillary Optimized,0.29mm ID | G1531-80560 | CAG1531-80560 | 21683 |
Jet,Cap Optimized, high temp,0.47mm ID | G1531-80620 | HPG1531-80620 | 23079 |
Split/Splitless Insert 6890 EPC | G1544-60575 | HPG1544-60575 | 22674 |
S/SL Insert Weldment, uses large filter | G1544-60585 | 12000-400 | 22686 |
6890 Splitvent replacement cartridge 2pk | G1544-80530 | HPG1544-80531 | 23031 |
6890 Splitvent replacement cartridge 2pk | G1544-80530 | CAG1544-80530 | 23031 |
Split trap assembly (6890) | G1544-80550 | HPG1544-80550 | 22820 |
Syringe, 5 ul, FN 23-26s/42/HP | G4513-80206 | 97035-358 | 24592 |
Trap, Hydrocarbon, 1/4in, 200cc | HT200-4 | 80083-118 | 20638 |
10cc PLASTIC SYRINGE | UCB310 | 89198-616 | 22775* |
Attachment | Size |
---|---|
Choice The Right Connections | 2.24 MB |
Request for QuotationGiMiTEC could help to find the right part as you need. For any inquiries or questions just Click Here to Contact Us |
We're Here to Help! Everything you need from troubleshooting, to method development assistance, to quality documents...!
NOTE: All discounts, coupons and promotions displayed on the web store are valid for web store orders only. Prices on the web store are exclusively for valued customers of GiMiTEC™. GiMiTEC™ does not sell parts for stocking purposes. Your account information is used to login to the site. Please save your password in a safe place. Taxes are charged after your order is placed. When ordering certain items on our store in large quantities the cost of shipping these items will increase your total order.
* Although GiMiTEC™ try our best to ensure that our online web store is kept up-to-date with prices and shopping choices, prices are subject to change without notice. In addition, as situations warrant, substitutions are made for discontinued items.
All parts are not guaranteed in stock and may delay your shipment. This is especially true in regards to items such as chemicals. GiMiTEC™ reserve the right to cancel your order at any time.
GiMiTEC™ reserves the right, at its sole discretion, to modify, add or remove any terms or conditions of these above information, or any information contained in the website without notice or liability. Any changes to these above information shall be effectively immediately following the posting of such changes on this website.
Despite our diligent efforts, a small number of items in our web site may be incorrectly priced. Rest assured that we will verify all prices as part of our shipping procedures and provide you with correct pricing in your order confirmations. We apologize in advance for any inconvenience you might experience. Thank you.
GiMiTEC™ reserves all rights to correct any errors in the online system prior to shipping and billing. If you suspect an error in pricing, please contact our Customer Service Department.
Trademarks of Other Manufactures mentioned herein are the property of their (Other Manufactures). or their respective owners. GiMiTEC™ is not affiliated with or licensed by any of these companies. All product names, logos, and brands are property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, logos, and brands does not imply endorsement.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and/or names or their products and are the property of their respective owners. We disclaims proprietary interest in the marks and names of others.
GiMiTEC™ and other GiMiTEC™ brand name. The trademarks mentioned herein are the property of the Gimium™ Ecosystem.